Harman/Kardon

Harman Kardon Citation ONE

Details
Variations

緊湊、智慧和驚人聲音

批發查詢: 點擊這裡

與您交流的美妙聲音

Harman Kardon Citation ONE 是一款次世代智慧喇叭,可傳遞豐富的聲音並採用一體化的緊湊設計。Citation ONE 使用十分方便,融合了家庭音響的創新及對設計細節的關注,帶來精緻的外觀並從緊湊設計傳遞令人驚嘆的聲音。音樂愛好者熱衷於充斥整個房間的悅耳聲音,並透過 Chromecast built-in 獲得 300 多種音樂服務及高清串流傳輸。Google Assistant 賦予 Citation ONE 便捷的語音控制,可在家實現免持操作。只需語音,即可獲得回應、播放音樂、安排一天的事務、控制智慧家居、享受休閒娛樂,等等!

項目# HKCITATIONONEBLKAS

一般規格

轉換器:1 個 20mm 高音喇叭,1 個 89mm 低音喇叭 Yes
輸出功率:40W RMS Yes
雜訊比:>80dB Yes
電源:100-240V – 50/60Hz Yes
無線網路:802.11 a/b/g/n/ac (2.4GHz/5GHz) Yes
2.4G Wi-Fi 發射機頻率範圍:2412 – 2472MHz(2.4GHz ISM 頻帶、美國 11 個頻道、歐洲和其他 13 個頻道) Yes
2.4G Wi-Fi 發射機功率:<20dBm Yes
2.4G Wi-Fi 調變:DBPSK、DQPSK、CCK、QPSK、BPSK、16QAM、64QAM Yes
5G Wi-Fi 發射機功率:<23dBm Yes
5G Wi-Fi 調變:QPSK、BPSK、16QAM、64QAM、256QAM Yes
5G Wi-Fi 發射機頻率範圍:5.15 - 5.35GHz、5.470 - 5.725GHz、5.725 - 5.825GHz Yes
受支援的音訊格式:HE-AAC、LC-AAC、MP3、Vorbis、WAV (LPCM)、FLAC、Opus Yes

Audio Specifications

Signal-to-noise ratio >80dB
Supported audio formats HE-AAC, LC-AAC, MP3, Vorbis, WAV (LPCM), FLAC, Opus
Output power 40W RMS
Transducer 1 x 20mm tweeter, 1 x 89mm woofer

尺寸圖

尺寸(寬 x 高 x 深):140 x 188x 140 mm Yes
重量:2 kg (4.4lb) Yes

控制和連接規格

Bluetooth® 版本:4.2 Yes
Bluetooth 發射機頻率範圍:2402 – 2480MHz Yes
Bluetooth 發射機功率:<5dBm Yes
Bluetooth 發射機調變:GFSK、π/4 DQPSK、8DPSK Yes
  • 1 個 Citation ONE
  • 1 本快速入門指南
  • 1 本保固說明書
  • 1 本安全說明書
  • 1 條電源線(1.8m)
product box
{"searchRecords":[{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka21Y000000SZkNQAW"},"Title":"WiFi Speakers: Using speaker without Voice Assistant","Id":"ka21Y000000SZkNQAW","ArticleNumber":"000012359","Question__c":"Can the speaker be used with Bluetooth without setting up Voice Assistant?","Answer__c":"JBL Playlist: \r\nYes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in)\r\n\r\nJBL Link Bar: \r\nYes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant.\r\n\r\nJBL Link Music: \r\nNo, this speaker requires setup via Google Home\r\n\r\nJBL Link Portable: \r\nNo, this speaker requires setup via Google Home\r\n\r\nJBL Link 10, 20 and Link View:\r\nNo, these speakers requires setup via Google Home\r\n\r\nHarman Kardon Citation series: \r\nNo, this speaker requires setup via Google Home\r\n\r\nHarman Kardon Allure: \r\nYes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say \"Now in setup mode, follow the instructions in the Harman Kardon Alexa App.\"\r\n\r\nHarman Kardon Allure Portable: \r\nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.\r\n\r\nHarman Kardon Astra:\r\nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.","ArticleType":"FAQ__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka21Y000000bqKFQAY"},"Title":"HK Citation: Recording conversation","Id":"ka21Y000000bqKFQAY","ArticleNumber":"000008776","Question__c":"Does the Citation speaker record all my conversations?","Answer__c":"No, the Citation speaker does not store any conversations, it listens only for a few seconds and then deletes the file. Only when using \"OK, Google\" or \"Hey, Google\" will it start recording your question in order for Google Assistant to fulfill your request. You can always delete all your recordings via \"My activity\" settings under your Google Account.","ArticleType":"FAQ__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d0000003GhWAAU"},"Title":"HK Citation: How to create a Stereo pair","Id":"ka25d0000003GhWAAU","ArticleNumber":"000010316","Question__c":"How to create a Stereo pair","Answer__c":"If you have two of the same model Google Assistant speakers, you can create a stereo speaker system.\n

How to create a stereo pair...

\n\n
  1. Open the Google Home app\"User-added
  2. Find the speaker you want to setup in stereo pair
  3. Find the speaker/room \"User-added
  4. Tap on Settings \"User-added
  5. Go to Sound Settings
  6. Find the Speaker pair
  7. You are now entering the setup page \"pair\" Tap \"User-added
  8. Find your speaker under the Pair with list and tap.
  9. Move the speaker to be Left or Right side and press \"User-added\n\t
    1. You can tap on Play sound to identify which speaker it is.
    \n\t
  10. Find a name for your Stereo pair \"User-added
  11. It takes a minute to complete the setup.
  12. When the configuration is done it will say Ready \"READY\"
  13. Press Done
\nYou have now completed the setup and created a Stereo pair sound experience.

NOTE 1:  This is only possible with two of the same speakers.  If they are not identical (Example: Citation 100 & Citation One), setting up a stereo pair will not be an option.

NOTE 2:  It is possible to make a stereo pair of a Mk1 with a Mk2. Setup as normal.
\nAirplay from the Mk2 will not be available.

NOTE 3: It is only possible to use Chromecast and Bluetooth in stereo, Airplay will be mono (and should be grouped in iOS Airplay menu.


 \n
    ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d0000003GhRAAU"},"Title":"HK Citation: Cleaning FAQ","Id":"ka25d0000003GhRAAU","ArticleNumber":"000009089","Question__c":"How to properly clean the fabric around the speakers","Answer__c":"Daily Care instructions for Citation speakers fabric (wool)\r\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\r\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\r\n\r\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\r\nStain removal guide\r\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\r\nHere is how to do it.\r\n\r\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\r\nFor dried stains use a spoon to roughen the surface.\r\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\r\nWARNING!\r\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\r\nRegular and normal cleaning\r\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\r\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\r\n \r\n\r\n\r\nGeneral information\r\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\r\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\r\nHARMAN do not have any recommended companies or partners to redirect any customers too.\r\n\r\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\r\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\r\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \r\n\r\nThere are a lot of information about the fabric we are using and you can contact them for further information.","ArticleType":"FAQ__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d0000003GhlAAE"},"Title":"HK CITATION: Set up Airplay without Google Assistant - iOS WAC","Id":"ka25d0000003GhlAAE","ArticleNumber":"000012354","Question__c":"How to set up Airplay without Google Assistant","Answer__c":"The Citation product with Airplay 2, use an iOS feature named Wireless Accessory Configuration (WAC), which is the easiest way to set up Wi-Fi for iPhone users. If you want to set up AirPlay with WAC and set up Google Assistant later, you can follow the below instructions.\n
    1. Go into the Wi-Fi settings on the iPhone/iPad
    2. Select the speaker you want to set up AirPlay under “SET UP NEW AIRPLAY SPEAKER...” on the lower part of the display.
    3. Choose the Wi-Fi network you want to connect this speaker to, then press Next. This should normally be the same network your phone is connected to, which will appear as the default option.
    4. The speaker will connect to the Wi-Fi network. Press Done to finish the setup.
    5. After setup is successful. You can tap the Airplay symbol in Control Center or from your favorite audio streaming app to use AirPlay from your iPhone and iPad.
    \nNote:\n\n
    • If you don’t see the correct Wi-Fi network, make sure that the speaker is in range of the Wi-Fi router or access point.
    • If your iPhone or iPad has never connected to this Wi-Fi network before, you will need to enter the Wi-Fi password at this time. Most users will not need to enter this password.
    • If you cannot see your speaker under “SET UP NEW AIRPLAY SPEAKER...”, unplug and plug in power again to start it again.
    • About streaming music from Apple TV, iTunes and Mac, you can visit https://support.apple.com/HT202809 for more information.
    ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d0000003GhHAAU"},"Title":"HK Citation: 4 Amber LEDS","Id":"ka25d0000003GhHAAU","ArticleNumber":"000008757","Question__c":"The 4 LED dots change to amber on my Citation speaker. What does this mean?","Answer__c":"The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.","ArticleType":"FAQ__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka21Y000000SZYTQA4"},"Title":"HK CITATION: Frequency response for speakers","Id":"ka21Y000000SZYTQA4","ArticleNumber":"000010972","Question__c":"What is the Frequency response of the Citation series?","Answer__c":"The Frequency response for the Citation series, except the subwoofer, is 50Hz to 20Khz.
     ","ArticleType":"How_Tos__kav"}]}