{"totalSize":38,"done":true,"searchRecords":[{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xmb3AAC"},"Title":"HK Citation: What you need to get started","Id":"ka25d000000Xmb3AAC","ArticleNumber":"000017308","Question__c":"Before you start installing your new device","Process__c":"

Getting started with the checklist

\n\n

• A Harman Kardon Citation device(s).
• Latest version of the Google Home app installed on your mobile device. 
• Latest version of the Google app  (Android only) installed on your mobile device
• A Google Account (you can create one online via Google).
• A mobile device with either iOS or Android support.\n\t
  • ​Must have iOS 10 or higher
  • Must have Android 5.0 and higher
  • There is no support for PC set up.
  \n\t
• Your mobile device must support 5 GHz Wireless Network connection in order to set up our Harman Kardon Citation device. Note: Wireless Network with WPA2-Enterprise encryption is not supported.
• An internet connection from your local ISP (Internet Service Provider).
• Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported). 
• Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.

\nOnce you have all requirement and what is needed then follow the video below that shows you how to install your device.

 ","Answer__c":"

Getting started with the checklist

\n\n

• A Harman Kardon Citation device(s).
• Latest version of the Google Home app installed on your mobile device. 
• Latest version of the Google app  (Android only) installed on your mobile device
• A Google Account (you can create one online via Google).
• A mobile device with either iOS or Android support.\n\t
  • ​Must have iOS 10 or higher
  • Must have Android 5.0 and higher
  • There is no support for PC set up.
  \n\t
• Your mobile device must support 5 GHz Wireless Network connection in order to set up our Harman Kardon Citation device. Note: Wireless Network with WPA2-Enterprise encryption is not supported.
• An internet connection from your local ISP (Internet Service Provider).
• Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported). 
• Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.

\nOnce you have all requirement and what is needed then follow the video below that shows you how to install your device.

 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000WOgSAAW"},"Title":"CITATION BAR: Software Update Release Notes","Id":"ka25d000000WOgSAAW","ArticleNumber":"000043913","Question__c":"CITATION BAR: Software Update Release Notes","Process__c":"

CITATION BAR

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: June 24, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Security improvements
2. Performance improvements

","Answer__c":"

CITATION BAR

Software Update Release Notes

------------------------------------------------------------------------

Version:  94384

Release Date: June 24, 2024

Release Media: OTA (over the air) Automatic Update

 

What’s New

1. Security improvements
2. Performance improvements

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000WR31AAG"},"Title":"HK CITATION: WiSA Technology & Compatibility","Id":"ka25d000000WR31AAG","ArticleNumber":"000018690","Question__c":"CITATION SERIES: WiSA Technology & Compatibility","Process__c":"

General information about WiSA:

\nWiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

For more information on WiSA technology, please go to the official WiSA website.

If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".\n

WiSA Certified products:

\nCitation Surrounds
Citation Sub
Citation Sub S
Citation Towers\n

Products making use of WiSA technology (not certified):

\nCitation Bar
Citation Multibeam 700
HK surround\n

Limitations:

\nWiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.","Answer__c":"

General information about WiSA:

\nWiSA is a wireless system designed specifically for audio and speakers. An audio system that incorporates WiSA technology has it's own internal wireless system. It is capable of doing 96kHz/24bit audio with an audio latency of only 5ms, virtually undetectable by the human ear.

For more information on WiSA technology, please go to the official WiSA website.

If a product is WiSA Certified, it can be used with any other WiSA certified product. For example a WiSA Ready TV with at transmitter.
Note: The overall sound quality is dependent on the processing and setup in the WiSA TV & transmitter, and may result in a performance (EQ, crossover and levels) not intended by the speaker manufacturer. To be sure that the Citation products sound the best, use a Citation Bar product as the main "hub".\n

WiSA Certified products:

\nCitation Surrounds
Citation Sub
Citation Sub S
Citation Towers\n

Products making use of WiSA technology (not certified):

\nCitation Bar
Citation Multibeam 700
HK surround\n

Limitations:

\nWiSA does not offer 3D audio formats like Dolby Atmos, and DTS:X yet, so at the moment it is limited to 5.1 or 7.1 Dolby Digital. So regardless of which brand of WiSA speaker you choose, Dolby Atmos will not be available yet.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm20AAC"},"Title":"HK CITATION: Controlling IOT devices","Id":"ka25d000000Xm20AAC","ArticleNumber":"000017763","Question__c":"Can I control iOT devices with my Citation speaker?","Process__c":"Citation will work with any smart home or iOT device labeled Works with Google Assistant.\n\n\nVisit http://assistant.google.com to learn more.","Answer__c":"Citation will work with any smart home or iOT device labeled Works with Google Assistant.\n\n\nVisit http://assistant.google.com to learn more.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmVMAA0"},"Title":"WiFi Speakers: Using speaker without Voice Assistant","Id":"ka25d000000XmVMAA0","ArticleNumber":"000021367","Question__c":"Can the speaker be used with Bluetooth without setting up Voice Assistant?","Process__c":"JBL Playlist: \nYes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in)\n\nJBL Link Bar: \nYes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant.\n\nJBL Link Music: \nNo, this speaker requires setup via Google Home\n\nJBL Link Portable: \nNo, this speaker requires setup via Google Home\n\nJBL Link 10, 20 and Link View:\nNo, these speakers requires setup via Google Home\n\nHarman Kardon Citation series: \nNo, this speaker requires setup via Google Home\n\nHarman Kardon Allure: \nYes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App."\n\nHarman Kardon Allure Portable: \nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.\n\nHarman Kardon Astra:\nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.","Answer__c":"JBL Playlist: \nYes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in)\n\nJBL Link Bar: \nYes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant.\n\nJBL Link Music: \nNo, this speaker requires setup via Google Home\n\nJBL Link Portable: \nNo, this speaker requires setup via Google Home\n\nJBL Link 10, 20 and Link View:\nNo, these speakers requires setup via Google Home\n\nHarman Kardon Citation series: \nNo, this speaker requires setup via Google Home\n\nHarman Kardon Allure: \nYes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App."\n\nHarman Kardon Allure Portable: \nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.\n\nHarman Kardon Astra:\nYes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmX0AAK"},"Title":"Google Assistant support: Device not responding to hotword","Id":"ka25d000000XmX0AAK","ArticleNumber":"000020165","Question__c":"Discover how to troubleshoot when your Google Assistant device isn’t responding to “Hey Google” or “Ok Google”.","Process__c":"","Answer__c":"","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm4dAAC"},"Title":"HK Citation: Recording conversation","Id":"ka25d000000Xm4dAAC","ArticleNumber":"000019976","Question__c":"Does the Citation speaker record all my conversations?","Process__c":"No, the Citation speaker does not store any conversations, it listens only for a few seconds and then deletes the file. Only when using "OK, Google" or "Hey, Google" will it start recording your question in order for Google Assistant to fulfill your request. You can always delete all your recordings via "My activity" settings under your Google Account.","Answer__c":"No, the Citation speaker does not store any conversations, it listens only for a few seconds and then deletes the file. Only when using "OK, Google" or "Hey, Google" will it start recording your question in order for Google Assistant to fulfill your request. You can always delete all your recordings via "My activity" settings under your Google Account.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm6KAAS"},"Title":"Google Assistant Not Making/Taking Phone Calls","Id":"ka25d000000Xm6KAAS","ArticleNumber":"000039494","Question__c":"Google Assistant Not Making/Taking Phone Calls","Process__c":"

As of December 1, 2022, Google Assistant on third party smart displays, soundbars, and speakers are no longer able to make a voice call to a landline or mobile number on the carrier network. Voice-over-IP calls continue to work. This is due to the ongoing infrastructure improvements.

 

Please click here to see Google’s official statement/article explaining this.

","Answer__c":"

As of December 1, 2022, Google Assistant on third party smart displays, soundbars, and speakers are no longer able to make a voice call to a landline or mobile number on the carrier network. Voice-over-IP calls continue to work. This is due to the ongoing infrastructure improvements.

 

Please click here to see Google’s official statement/article explaining this.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm3rAAC"},"Title":"HK CITATION: Resetting speakers","Id":"ka25d000000Xm3rAAC","ArticleNumber":"000018601","Question__c":"How can I factory reset my Citation device?","Process__c":"For Citation ONE, Citation 100, Citation Sub and Citation Surround, Press and hold the RESET button on the speaker for 5 seconds.\n\nFor Citation 300, Citation 500, Citation Bar and Citation Tower, Press and hold the RESET button on the speaker for 5 seconds, or select the Factory Reset option in the touch screen settings menu.","Answer__c":"For Citation ONE, Citation 100, Citation Sub and Citation Surround, Press and hold the RESET button on the speaker for 5 seconds.\n\nFor Citation 300, Citation 500, Citation Bar and Citation Tower, Press and hold the RESET button on the speaker for 5 seconds, or select the Factory Reset option in the touch screen settings menu.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmOWAA0"},"Title":"HK Citation: Bluetooth pairing","Id":"ka25d000000XmOWAA0","ArticleNumber":"000025617","Question__c":"How to connect your Bluetooth smartphone or tablet","Process__c":"

Citation One and Citation 100

\n\n

1. Press the Bluetooth icon. Located on the top panel.
2. Go to -menuMake sure Bluetooth is 
3. Find your Citation speaker and connect.

\n          \n\n

1. You are now connected and ready to play music over Bluetooth, Enjoy!

\n\n

Citation 300, 500, Bar and Towers

\n\n

1. Swipe up on the display to find Bluetooth icon.
2. Tap Icon will light up Go to -menu Make sure Bluetooth is
3. Find your Citation speaker.

\n          \n\n

1. You are now connected and ready to play music over Bluetooth, Enjoy!

","Answer__c":"

Citation One and Citation 100

\n\n

1. Press the Bluetooth icon. Located on the top panel.
2. Go to -menuMake sure Bluetooth is 
3. Find your Citation speaker and connect.

\n          \n\n

1. You are now connected and ready to play music over Bluetooth, Enjoy!

\n\n

Citation 300, 500, Bar and Towers

\n\n

1. Swipe up on the display to find Bluetooth icon.
2. Tap Icon will light up Go to -menu Make sure Bluetooth is
3. Find your Citation speaker.

\n          \n\n

1. You are now connected and ready to play music over Bluetooth, Enjoy!

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmXDAA0"},"Title":"HK CITATION: Programmable Presets","Id":"ka25d000000XmXDAA0","ArticleNumber":"000020022","Question__c":"How to create and add Presets?","Process__c":"In our latest update for Citation, we added a couple of new features.
We are going to talk about our new programmable preset feature.

With this feature, you can add a voice command such as "Turn off the lights in the Bedroom" or "Play my playlist Rock road classic" without using your voice.
Once you have recorded the action, you will see an icon on your Citation display. Tap on this specific recorded command, and the Citation will do all the magic for you!

Enough of what it can do, let us create a preset:\n

1. Scroll down on your Citation Display to you see "Voice presets."
2. Press on the + sign.
3. Say your command: Play Radio FM\n\t
   1. Do not use "Hey or OK, Google at this point."
   \n\t
4. Press the "V" icon after the command is finished.
5. Select an icon.
6. Your Preset is now ready, tap it to give it a try.

\nTo delete any presets.\n\n

• Press and hold down the preset.
• A menu will appear, hit the "TRASHCAN" icon.

","Answer__c":"In our latest update for Citation, we added a couple of new features.
We are going to talk about our new programmable preset feature.

With this feature, you can add a voice command such as "Turn off the lights in the Bedroom" or "Play my playlist Rock road classic" without using your voice.
Once you have recorded the action, you will see an icon on your Citation display. Tap on this specific recorded command, and the Citation will do all the magic for you!

Enough of what it can do, let us create a preset:\n

1. Scroll down on your Citation Display to you see "Voice presets."
2. Press on the + sign.
3. Say your command: Play Radio FM\n\t
   1. Do not use "Hey or OK, Google at this point."
   \n\t
4. Press the "V" icon after the command is finished.
5. Select an icon.
6. Your Preset is now ready, tap it to give it a try.

\nTo delete any presets.\n\n

• Press and hold down the preset.
• A menu will appear, hit the "TRASHCAN" icon.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmbzAAC"},"Title":"HK Citation: How to mute the Google Voice assistant","Id":"ka25d000000XmbzAAC","ArticleNumber":"000016783","Question__c":"How to mute the Google Voice assistant on your HK Citation speaker","Process__c":"

\n\n

1. Touch the microphone icon on the screen to mute the Google Voice assistant microphone.\n\n\t
   1. NOTE: Google Assistant will not work when the microphone is muted.
   \n\t
2. Touch and press it again to unmute the microphone.
3. You can now give it any voice commands that you would like.

","Answer__c":"

\n\n

1. Touch the microphone icon on the screen to mute the Google Voice assistant microphone.\n\n\t
   1. NOTE: Google Assistant will not work when the microphone is muted.
   \n\t
2. Touch and press it again to unmute the microphone.
3. You can now give it any voice commands that you would like.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmWyAAK"},"Title":"Google Assistant: Play music and more with the Google Assistant","Id":"ka25d000000XmWyAAK","ArticleNumber":"000020227","Question__c":"How to play music and more with your Google Assistant enabled smart speaker","Process__c":"This video shows how to play music and much more with your Google Assistant. You can practice all of your voice commands on your Harman/Kardon Citation or JBL LINK products.


","Answer__c":"This video shows how to play music and much more with your Google Assistant. You can practice all of your voice commands on your Harman/Kardon Citation or JBL LINK products.


","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmbwAAC"},"Title":"HK Citation: Cleaning FAQ","Id":"ka25d000000XmbwAAC","ArticleNumber":"000016808","Question__c":"How to properly clean the fabric around the speakers","Process__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","Answer__c":"Daily Care instructions for Citation speakers fabric (wool)\nDaily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.\nNever use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!\n\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet).\nStain removal guide\nIf you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.\nHere is how to do it.\n\nFirst, soak up the liquid with an absorbent napkin or Microfiber cloth.\nFor dried stains use a spoon to roughen the surface.\nTo avoid the stain spreading further start from the edge of the stain working towards the middle.\nWARNING!\nBe careful when using solvents, because these could dissolve the upholstery material beneath.\nRegular and normal cleaning\nVacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.\nWhen using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).\n \n\n\nGeneral information\nThese tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.\nIn all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.\nHARMAN do not have any recommended companies or partners to redirect any customers too.\n\nFor furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:\nhttps://kvadrat.dk/care-and-maintenance/upholsteries\nhttps://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf \n\nThere are a lot of information about the fabric we are using and you can contact them for further information.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmbyAAC"},"Title":"HK Citation: Cleaning the speakers","Id":"ka25d000000XmbyAAC","ArticleNumber":"000016792","Question__c":"How to properly clean the fabric around the speakers","Process__c":"

Daily Care instructions for Citation speakers fabric (wool)

\n\n

Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!

\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet). \n\n

Stain removal guide

\n\n

If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
Here is how to do it.

\n\n

1. First, soak up the liquid with an absorbent napkin or Microfiber cloth.
2. For dried stains use a spoon to roughen the surface. \n\t
   1. To avoid the stain spreading further start from the edge of the stain working towards the middle.
   \n\t
3. WARNING!\n\t
   1. Be careful when using solvents, because these could dissolve the upholstery material beneath.
   \n\t

\n\n

Regular and normal cleaning

\n\n

Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
 

\n\n

General information

\n\n

These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
HARMAN do not have any recommended companies or partners to redirect any customers too.

For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:
https://kvadrat.dk/care-and-maintenance/upholsteries
https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf

There are a lot of information about the fabric we are using and you can contact them for further information.

","Answer__c":"

Daily Care instructions for Citation speakers fabric (wool)

\n\n

Daily care and immediate stain removal will ensure that your Harman/Kardon Citation wool upholstery will keep looking good for many years.
Never use undiluted cleaning agents, bleaching agents, ammonia or soap intended for hard surfaces, as this may damage the fabric and Citation speaker itself!

\nMany types of stain can be removed using warm water with a microfiber cloth (not too wet). \n\n

Stain removal guide

\n\n

If you act quickly with any stains on your Citation device then it is not difficult to remove or avoid any spill/stains.
Here is how to do it.

\n\n

1. First, soak up the liquid with an absorbent napkin or Microfiber cloth.
2. For dried stains use a spoon to roughen the surface. \n\t
   1. To avoid the stain spreading further start from the edge of the stain working towards the middle.
   \n\t
3. WARNING!\n\t
   1. Be careful when using solvents, because these could dissolve the upholstery material beneath.
   \n\t

\n\n

Regular and normal cleaning

\n\n

Vacuum frequently every week is the best way to keep the Harman/Kardon Citation fabric intact or use a varm wet Microfiber cloth.
When using a vacuum cleaner, remember to set the power to half which is most appropriated to use for Citation devices (this will not harm the design or fabric).
 

\n\n

General information

\n\n

These tips are purely recommendations and cannot guarantee 100% stain removal on your Harman/Kardon Citation device.
In all cases, we recommend contacting a professional cleaning company, particularly for bigger stains and for thorough cleaning the wool fabric and speaker.
HARMAN do not have any recommended companies or partners to redirect any customers too.

For furter information we advise visiting the fabric company called KVADRAT by clicking on these links below:
https://kvadrat.dk/care-and-maintenance/upholsteries
https://kvadrat.dk/download/media/download-section/relatedfiles/kvadrat-maintenance-manual-2016-uk.pdf

There are a lot of information about the fabric we are using and you can contact them for further information.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmZBAA0"},"Title":"HK CITATION: Set up Airplay without Google Assistant - iOS WAC","Id":"ka25d000000XmZBAA0","ArticleNumber":"000018613","Question__c":"How to set up Airplay without Google Assistant","Process__c":"The Citation product with Airplay 2, use an iOS feature named Wireless Accessory Configuration (WAC), which is the easiest way to set up Wi-Fi for iPhone users. If you want to set up AirPlay with WAC and set up Google Assistant later, you can follow the below instructions.\n

1. Go into the Wi-Fi settings on the iPhone/iPad
2. Select the speaker you want to set up AirPlay under “SET UP NEW AIRPLAY SPEAKER...” on the lower part of the display.
3. Choose the Wi-Fi network you want to connect this speaker to, then press Next. This should normally be the same network your phone is connected to, which will appear as the default option.
4. The speaker will connect to the Wi-Fi network. Press Done to finish the setup.
5. After setup is successful. You can tap the Airplay symbol in Control Center or from your favorite audio streaming app to use AirPlay from your iPhone and iPad.

\nNote:\n\n

• If you don’t see the correct Wi-Fi network, make sure that the speaker is in range of the Wi-Fi router or access point.
• If your iPhone or iPad has never connected to this Wi-Fi network before, you will need to enter the Wi-Fi password at this time. Most users will not need to enter this password.
• If you cannot see your speaker under “SET UP NEW AIRPLAY SPEAKER...”, unplug and plug in power again to start it again.
• About streaming music from Apple TV, iTunes and Mac, you can visit https://support.apple.com/HT202809 for more information.

","Answer__c":"The Citation product with Airplay 2, use an iOS feature named Wireless Accessory Configuration (WAC), which is the easiest way to set up Wi-Fi for iPhone users. If you want to set up AirPlay with WAC and set up Google Assistant later, you can follow the below instructions.\n

1. Go into the Wi-Fi settings on the iPhone/iPad
2. Select the speaker you want to set up AirPlay under “SET UP NEW AIRPLAY SPEAKER...” on the lower part of the display.
3. Choose the Wi-Fi network you want to connect this speaker to, then press Next. This should normally be the same network your phone is connected to, which will appear as the default option.
4. The speaker will connect to the Wi-Fi network. Press Done to finish the setup.
5. After setup is successful. You can tap the Airplay symbol in Control Center or from your favorite audio streaming app to use AirPlay from your iPhone and iPad.

\nNote:\n\n

• If you don’t see the correct Wi-Fi network, make sure that the speaker is in range of the Wi-Fi router or access point.
• If your iPhone or iPad has never connected to this Wi-Fi network before, you will need to enter the Wi-Fi password at this time. Most users will not need to enter this password.
• If you cannot see your speaker under “SET UP NEW AIRPLAY SPEAKER...”, unplug and plug in power again to start it again.
• About streaming music from Apple TV, iTunes and Mac, you can visit https://support.apple.com/HT202809 for more information.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmWxAAK"},"Title":"Google Assistant: Getting started with Google Assistant on a smart speaker","Id":"ka25d000000XmWxAAK","ArticleNumber":"000020236","Question__c":"How to use Google Assistant with a smart speaker","Process__c":"This video shows how to use a smart speaker that has Google Assistant built-in.
Our LINK series have Google Assistant built-in therefore you can practice your voice commands together with Harman/Kardon Citation or JBL LINK products

","Answer__c":"This video shows how to use a smart speaker that has Google Assistant built-in.
Our LINK series have Google Assistant built-in therefore you can practice your voice commands together with Harman/Kardon Citation or JBL LINK products

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xma7AAC"},"Title":"HK CITATION and LINK Music/Portable: Chromecast is not working after AirPlay setup","Id":"ka25d000000Xma7AAC","ArticleNumber":"000018104","Question__c":"I am trying to use Chromecast, but it is not working after the setup.","Process__c":"To use Chromecast, you must continue the setup in the Google Home app first.
Configuring the speaker only with Apple WAC will not enable the Chromecast feature.
For this to happen, you must sign-in with your Google account.

You can quickly try out the Chromecast feature, and if you do not like it, reset your Citation or LINK speaker, and redo the configuration part on your Apple device.","Answer__c":"To use Chromecast, you must continue the setup in the Google Home app first.
Configuring the speaker only with Apple WAC will not enable the Chromecast feature.
For this to happen, you must sign-in with your Google account.

You can quickly try out the Chromecast feature, and if you do not like it, reset your Citation or LINK speaker, and redo the configuration part on your Apple device.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm6EAAS"},"Title":"HK Citation: BAR not responding to voice","Id":"ka25d000000Xm6EAAS","ArticleNumber":"000020940","Question__c":"I am using AUX-in, Optical, or HDMI with my Citation soundbar, and Google Voice Assistant does not respond. How can I use Google Voice Assistant?","Process__c":"Use the Google Voice Assistant button on your Citation soundbar remote control when using these inputs HDMI, AUX or Optical. When you press this button, the current volume level will temporarily decrease and the Google Voice Assistant will begin listening for your command. \nThe reason you need to use the remote control is that Google Assistant does not support Multi-channel audio from your source device (TV, BlueRay Player or TV-BOX) and therefore the mic is automatically muted unless the Google Voice Assistant button is pressed.\n\nGoogle Voice Assistant is always listening when streaming music over Wi-Fi or Bluetooth.","Answer__c":"Use the Google Voice Assistant button on your Citation soundbar remote control when using these inputs HDMI, AUX or Optical. When you press this button, the current volume level will temporarily decrease and the Google Voice Assistant will begin listening for your command. \nThe reason you need to use the remote control is that Google Assistant does not support Multi-channel audio from your source device (TV, BlueRay Player or TV-BOX) and therefore the mic is automatically muted unless the Google Voice Assistant button is pressed.\n\nGoogle Voice Assistant is always listening when streaming music over Wi-Fi or Bluetooth.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm5nAAC"},"Title":"HK CITATION: Low budget Android phones","Id":"ka25d000000Xm5nAAC","ArticleNumber":"000019995","Question__c":"I am using an Android phone and cannot set up my Citation speaker","Process__c":"Please try turning Bluetooth off on your phone and trying again, and make sure Location services are enabled for the Google Home app.\n\nIf this does not work, certain phones are not compatible with the Google Home setup process, including the Vivo X21A, Vivo NEX S, and Vivo X9. Please use a different device for setup.","Answer__c":"Please try turning Bluetooth off on your phone and trying again, and make sure Location services are enabled for the Google Home app.\n\nIf this does not work, certain phones are not compatible with the Google Home setup process, including the Vivo X21A, Vivo NEX S, and Vivo X9. Please use a different device for setup.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm0dAAC"},"Title":"HK CITATION: Using Google Voice in Surround systems","Id":"ka25d000000Xm0dAAC","ArticleNumber":"000021434","Question__c":"I have a Surround sound system with other Citation speakers. How can I use Google Voice Assistant?","Process__c":"Use the Google Voice Assistant button on your Citation Bar remote control when using these inputs. When you press this button, the current volume level will temporarily decrease and the Google Voice Assistant will begin listening for your command. \n\nIf you wish to use Google Voice Assistant with the wake-up word when steaming music over Wi-Fi or Bluetooth in a 5.1 surround sound system, turn off the Surround setting on the Citation Bar touch screen.","Answer__c":"Use the Google Voice Assistant button on your Citation Bar remote control when using these inputs. When you press this button, the current volume level will temporarily decrease and the Google Voice Assistant will begin listening for your command. \n\nIf you wish to use Google Voice Assistant with the wake-up word when steaming music over Wi-Fi or Bluetooth in a 5.1 surround sound system, turn off the Surround setting on the Citation Bar touch screen.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmZpAAK"},"Title":"JBL & HK WiFi Speakers: Speaker connected through Device Utility app, but not found in Google Home app","Id":"ka25d000000XmZpAAK","ArticleNumber":"000018240","Question__c":"I have connected my speaker using the Device Utility app, but the Google Home app cannot find the speaker. What should I do?","Process__c":"Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
 ","Answer__c":"Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmZAAA0"},"Title":"HK Citation: Wi-Fi network not found during setup","Id":"ka25d000000XmZAAA0","ArticleNumber":"000018624","Question__c":"Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.","Process__c":"

The Checklist

\n\n

Let us walk-through a list of things needed to ensure every requirement is met.

\n\n

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
   \n\t
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

\nWatch the video below for help with setting up your Google Assistant device.\n\n

\n\n

Wireless Network Extender

\n\n

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

\n\n

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

\n\n

One Wireless Network Name (SSID)

\n\n

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the Wireless speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Wireless connected speaker and Google Assistant request.

\n\n

 

","Answer__c":"

The Checklist

\n\n

Let us walk-through a list of things needed to ensure every requirement is met.

\n\n

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
   \n\t
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

\nWatch the video below for help with setting up your Google Assistant device.\n\n

\n\n

Wireless Network Extender

\n\n

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

\n\n

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

\n\n

One Wireless Network Name (SSID)

\n\n

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the Wireless speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Wireless connected speaker and Google Assistant request.

\n\n

 

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XqvyAAC"},"Title":"Wi-Fi network not found during setup","Id":"ka25d000000XqvyAAC","ArticleNumber":"000020177","Question__c":"Learn how to troubleshoot when you can’t connect your Google Assistant device to your home Wi-Fi network.","Process__c":"

The Checklist

\n\n

Let us walk-through a list of things needed to ensure every requirement is met.

\n\n

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
   \n\t
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

\nWatch the video below for help with setting up your Google Assistant device.\n\n

\n\n

Wireless Network Extender

\n\n

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

\n\n

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

\n\n

One Wireless Network Name (SSID)

\n\n

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.

\n\n

 

","Answer__c":"

The Checklist

\n\n

Let us walk-through a list of things needed to ensure every requirement is met.

\n\n

1. Check your mobile device if that is able to connect to same Wireless network.
2. Make sure you are within range of your Wireless router.
3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.\n\t
   1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
   2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
   \n\t
5. Try using a different mobile device, if you have one.
6. Reboot your Wireless network router and your mobile device.

\nWatch the video below for help with setting up your Google Assistant device.\n\n

\n\n

Wireless Network Extender

\n\n

Some houses or apartments can be too big for one Wireless network router to cover it all.
Let's talk about the issues that might appear with an Extender network.

\n\n

1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

\n\n

One Wireless Network Name (SSID)

\n\n

1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
2. If the speaker is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
3. To solve this issue, using two different name for your extended network will help with the performance of the Speaker and Google Assistant request.

\n\n

 

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm5qAAC"},"Title":"HK CITATION: WiFi out of range","Id":"ka25d000000Xm5qAAC","ArticleNumber":"000019982","Question__c":"My Citation speaker said it needs to be set up, but I have already set it up and it was working previously.","Process__c":"Make sure your home network's Internet connection is active and the Citation speaker is placed within Wi-Fi range.\n\nIf you are using a Wi-Fi extender, your speaker may be confused which network to connect to. If this is happening, try moving the speaker closer to the main router and renaming the Wi-Fi extender.","Answer__c":"Make sure your home network's Internet connection is active and the Citation speaker is placed within Wi-Fi range.\n\nIf you are using a Wi-Fi extender, your speaker may be confused which network to connect to. If this is happening, try moving the speaker closer to the main router and renaming the Wi-Fi extender.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xmb0AAC"},"Title":"HK CITATION: Not showing up in Google Home app","Id":"ka25d000000Xmb0AAC","ArticleNumber":"000017330","Question__c":"Not visible in the Google Home app during install","Process__c":"

What you need first

\n\n

Make sure that the device is installed on your Wireless network, by ensuring these steps below:

\n\n

1. You have the most recent version of the Google Home app installed 
2. Your Citation device is powered on
3. Your Citation device is plugged into a wall outlet.
4. The Citation device is located near your router 
5. The white LED lights in front of the Citation device are blinking 
6. If you are using an Apple iOS device, you need to turn on Bluetooth to installed the device.\n\t
   1. \n\t\t

      On your iOS device Home screen, tap Settings > Bluetooth 

      \n\t\t
   2. Make sure Bluetooth is on
   3. Return back to the Google Home app 
   4. Your Citation device should appear as "Set up this device"
   \n\t
7. If you are using an Android device, you need to turn on Bluetooth and Location Services.\n\t
   1. On your Android device, tap Settings.
   2. Find Bluetooth settings > Make sure Bluetooth is on
   3. Tap Location > Turn on location 
   4. Tap Settings > Apps > Google Home app > Permissions.
   5. Next to "Location",  check the slider is on.
   6. Your Citation device should appear as "Set up this device" .
   \n\t

\nIf you are still having trouble discovering your Citation devices in the Google Home app, follow the steps below for further troubleshooting.\n\n

Troubleshooting

\n\n

Step 1. Reboot your Citation device 

\n\n

1. Disconnect the power cable from your Citation device 
2. Reconnect power cable to your Citation device 

\n\n

Step 2. Force close and relaunch the Google Home app      

\n\n

1. From your Apple iOS device, do the following below:                   \n\t
   1. Press the Home button two times quickly. There will be a small preview of your recently used apps.      
   2. Select the app you want to close and swipe up towards the top of the screen.
   3. Launch the Google Home app again.        
   \n\t
2. From your Android device, do the following below:              \n\t
   1. Launch the Recent Applications menu to see small previews of your recently used apps. The Recent Apps button, a square icon, should be accessible at nearly any time along the bottom of the screen along with the other buttons on the virtual task bar.
   2. Select the app you want to close and swipe left or tap the X.
   3. Launch the Google Home app again.
   \n\t

\n \n\n

Last thing to try​ 

\n\n

If you are still experiencing issues with your Citation device not connecting to your Wireless network, try the following:

\n\n

1. \n\t

   Try finding another mobile device to set up your Citation device, sometimes it can help connecting your speaker 

   \n\t
2. \n\t

   Relocate your Citation device, or try to disable other Wireless network devices that might cause interference for your Citation device.

   \n\t
3. Perform a factory reset of your device, by holding down the reset button for more than 5 seconds.
4. Reboot your Wireless router           
5. Lastly, try turning Wi-Fi off and then back on again on your mobile device. Reopen your Google Home app and try again.

","Answer__c":"

What you need first

\n\n

Make sure that the device is installed on your Wireless network, by ensuring these steps below:

\n\n

1. You have the most recent version of the Google Home app installed 
2. Your Citation device is powered on
3. Your Citation device is plugged into a wall outlet.
4. The Citation device is located near your router 
5. The white LED lights in front of the Citation device are blinking 
6. If you are using an Apple iOS device, you need to turn on Bluetooth to installed the device.\n\t
   1. \n\t\t

      On your iOS device Home screen, tap Settings > Bluetooth 

      \n\t\t
   2. Make sure Bluetooth is on
   3. Return back to the Google Home app 
   4. Your Citation device should appear as "Set up this device"
   \n\t
7. If you are using an Android device, you need to turn on Bluetooth and Location Services.\n\t
   1. On your Android device, tap Settings.
   2. Find Bluetooth settings > Make sure Bluetooth is on
   3. Tap Location > Turn on location 
   4. Tap Settings > Apps > Google Home app > Permissions.
   5. Next to "Location",  check the slider is on.
   6. Your Citation device should appear as "Set up this device" .
   \n\t

\nIf you are still having trouble discovering your Citation devices in the Google Home app, follow the steps below for further troubleshooting.\n\n

Troubleshooting

\n\n

Step 1. Reboot your Citation device 

\n\n

1. Disconnect the power cable from your Citation device 
2. Reconnect power cable to your Citation device 

\n\n

Step 2. Force close and relaunch the Google Home app      

\n\n

1. From your Apple iOS device, do the following below:                   \n\t
   1. Press the Home button two times quickly. There will be a small preview of your recently used apps.      
   2. Select the app you want to close and swipe up towards the top of the screen.
   3. Launch the Google Home app again.        
   \n\t
2. From your Android device, do the following below:              \n\t
   1. Launch the Recent Applications menu to see small previews of your recently used apps. The Recent Apps button, a square icon, should be accessible at nearly any time along the bottom of the screen along with the other buttons on the virtual task bar.
   2. Select the app you want to close and swipe left or tap the X.
   3. Launch the Google Home app again.
   \n\t

\n \n\n

Last thing to try​ 

\n\n

If you are still experiencing issues with your Citation device not connecting to your Wireless network, try the following:

\n\n

1. \n\t

   Try finding another mobile device to set up your Citation device, sometimes it can help connecting your speaker 

   \n\t
2. \n\t

   Relocate your Citation device, or try to disable other Wireless network devices that might cause interference for your Citation device.

   \n\t
3. Perform a factory reset of your device, by holding down the reset button for more than 5 seconds.
4. Reboot your Wireless router           
5. Lastly, try turning Wi-Fi off and then back on again on your mobile device. Reopen your Google Home app and try again.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmOXAA0"},"Title":"HK Citation: Setup instructions Android","Id":"ka25d000000XmOXAA0","ArticleNumber":"000025612","Question__c":"Setup instructions for Android","Process__c":"

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app \n\t
   1. Make sure you have permitted the Google Home app to view your location.
   \n\t
6. First option Tap Add Set up device Set up new devices in your home
7. Second  option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

\n
 \n

Still not sure how to connect, then watch this video below:

\n","Answer__c":"

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Enable Bluetooth
4. Enable Location services
5. Open your Google Home app \n\t
   1. Make sure you have permitted the Google Home app to view your location.
   \n\t
6. First option Tap Add Set up device Set up new devices in your home
7. Second  option Tap X device found Select Home location
8. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

\n
 \n

Still not sure how to connect, then watch this video below:

\n","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmOZAA0"},"Title":"HK Citation: Setup instructions iOS","Id":"ka25d000000XmOZAA0","ArticleNumber":"000025602","Question__c":"Setup instructions for Apple iOS devices","Process__c":"

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second  option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

\n\n\n

Still not sure how to connect, then watch this video below:

\n\n\n

 

","Answer__c":"

1. Power on your Harman Kardon Citation speaker.
2. Verify that you are connected to the right Wi-Fi network on your smartphone.
3. Open your Google Home app .
4. Enable Bluetooth
5. First option Tap Add Set up device Set up new devices in your home
6. Second  option Tap X device found Select Home location
7. Follow the instruction on screen to add your new Harman Kardon Citation speaker.

\n\n\n

Still not sure how to connect, then watch this video below:

\n\n\n

 

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm9IAAS"},"Title":"HK Citation: Not visible as Chromecast device","Id":"ka25d000000Xm9IAAS","ArticleNumber":"000033717","Question__c":"Sometimes my Chromecast enabled streaming app cannot see my Citation speaker. What should I do?","Process__c":""In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback.\n\nIf you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."","Answer__c":""In certain network conditions, your speaker may not be visible from your streaming app. You can still use voice control to start & control playback.\n\nIf you wish to use your phone app to control playback, please power cycle your Citation speaker and your phone."","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XlxpAAC"},"Title":"HK Citation: 4 Amber LEDS","Id":"ka25d000000XlxpAAC","ArticleNumber":"000018609","Question__c":"The 4 LED dots change to amber on my Citation speaker. What does this mean?","Process__c":"The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.","Answer__c":"The amber LED lights indicate that the microphone is muted and the Google Assistant will not react to any voice keywords until the microphone is unmuted.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XlwiAAC"},"Title":"HK CITATION: Wi-Fi protocol support","Id":"ka25d000000XlwiAAC","ArticleNumber":"000020000","Question__c":"What Wi-Fi standards are supported for Citation?","Process__c":"Citation speakers support 802.11g, 802.11n, and 802.11ac standards on both 2.4 GHz and 5 GHz bands. We recommend using 5 GHz if available, as this will give you more stable performance and use the full power of your wireless audio.\n\nContact our customer support to get in touch with an expert that can help you with your Wi-Fi network. We are here to help!","Answer__c":"Citation speakers support 802.11g, 802.11n, and 802.11ac standards on both 2.4 GHz and 5 GHz bands. We recommend using 5 GHz if available, as this will give you more stable performance and use the full power of your wireless audio.\n\nContact our customer support to get in touch with an expert that can help you with your Wi-Fi network. We are here to help!","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000Xm3TAAS"},"Title":"HK CITATION: Multiple devices reacting to voice","Id":"ka25d000000Xm3TAAS","ArticleNumber":"000020007","Question__c":"What happens if you have multiple Citation speakers, will all react to \"Hey Google\" or \"OK Google\"?","Process__c":"All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.","Answer__c":"All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmV7AAK"},"Title":"HK CITATION: Frequency response for speakers","Id":"ka25d000000XmV7AAK","ArticleNumber":"000021540","Question__c":"What is the Frequency response of the Citation series?","Process__c":"The Frequency response for the Citation series, except the subwoofer, is 50Hz to 20Khz.
 ","Answer__c":"The Frequency response for the Citation series, except the subwoofer, is 50Hz to 20Khz.
 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XlyKAAS"},"Title":"HK CITATION: Wi-Fi Connection failed during setup","Id":"ka25d000000XlyKAAS","ArticleNumber":"000020093","Question__c":"What to do when Wireless network connection fails during setup","Process__c":"Let's run through some basic check marks to ensure we didn't miss anything while setting up your device.\n

1. Your Citation device is turned on
2. Check the password you have entered, and re-enter it again (typos can happen).
3. Make sure your mobile device has the initial support needed:\n\t
   1. Android 4.4 OS and higher
   2. Apple iOS 10 OS and higher
   3. The latest version of Google Home app
   \n\t
4. Your phone needs Bluetooth to be on 
5. Enable Location Service (Android only)
6. Plus you need to permit Google Home app to access your location on the phone (Android only).

\n\n

The basic check is done, and we are now moving into your Wireless network setup.

\n\n

1. Try moving your speaker closer to the Wireless network router 
2. Have you previously connected the speaker to your WiFi network?  If yes, look below or move to "Troubleshooting"\n\t
   1. Did you recently make any changes to your network, such as buying a new router, adding an extender, or maybe changed settings?
   2. \n\t\t

      Maybe your ISP (Internet Service Provider) did some changes, possibly even updating your Wireless router software.

      \n\t\t
   \n\t

\nIf you still are experiencing issues connecting the device to your Wireless network, let's do some further troubleshooting.\n\n

Troubleshooting

\n\n

1. Your WiFi router might need a reboot, unplug power for 1 minute and connect power again.\n\t
   1. While you are rebooting your WiFi router, we advise doing the same for your speaker. Simply disconnect power and reconnect power again.
   2. In case rebooting the speaker didn't work, let's try resetting your speaker by pressing the Reset Button for 5 seconds (Front LED will light up).
   \n\t
2. Go ahead with the setup again (remember to open Google Home app )
3. Reboot your mobile device

\n\n

WiFi Network Troubleshooting

\n\n

• Check your WiFi router settings. Be sure that UPnP (Universal Plug and Play) is enabled.
• Change Wireless channels on your WiFi router on 2.4G or 5G..\n\t
  • Avoid using other channels on 2.4G other than 1, 6 and 11. The rest are a NO-GO.
  • Keep a maximum of 8 devices in total on 2.4G (that is including our speakers).
  • Move products to WiFi 5G band, if they support it, to reduce the stress factor on the 2.4G band
  \n\t
• Check your WiFi router to see if there is a MAC address limitation.\n\t
  • MAC address limitation is when your router is set/fixed to a maximum of 20 devices (or whatever it may have been configured for).
  • When you want to add the 21st device your router will deny access because you have filled up the 20 devices.
  • You need to clear or delete old devices that are not in use anymore. This may require someone with technical knowledge.
  • We advise that you don't have any MAC address limitations at all.
  \n\t
• Avoid bad extenders (Cheap ones are often not powerful enough to deal with or handle the kind of data required to transmit high quality audio).\n\t
  • With extenders, the connection between "router and extender" is decreased by 50%.  That said, your data will be even slower,. having to processes it while the speed is decreased.
  \n\t

\nThere are more things you can do to optimize your WiFi router, but these above are the most common issues happening in users homes.

 ","Answer__c":"Let's run through some basic check marks to ensure we didn't miss anything while setting up your device.\n

1. Your Citation device is turned on
2. Check the password you have entered, and re-enter it again (typos can happen).
3. Make sure your mobile device has the initial support needed:\n\t
   1. Android 4.4 OS and higher
   2. Apple iOS 10 OS and higher
   3. The latest version of Google Home app
   \n\t
4. Your phone needs Bluetooth to be on 
5. Enable Location Service (Android only)
6. Plus you need to permit Google Home app to access your location on the phone (Android only).

\n\n

The basic check is done, and we are now moving into your Wireless network setup.

\n\n

1. Try moving your speaker closer to the Wireless network router 
2. Have you previously connected the speaker to your WiFi network?  If yes, look below or move to "Troubleshooting"\n\t
   1. Did you recently make any changes to your network, such as buying a new router, adding an extender, or maybe changed settings?
   2. \n\t\t

      Maybe your ISP (Internet Service Provider) did some changes, possibly even updating your Wireless router software.

      \n\t\t
   \n\t

\nIf you still are experiencing issues connecting the device to your Wireless network, let's do some further troubleshooting.\n\n

Troubleshooting

\n\n

1. Your WiFi router might need a reboot, unplug power for 1 minute and connect power again.\n\t
   1. While you are rebooting your WiFi router, we advise doing the same for your speaker. Simply disconnect power and reconnect power again.
   2. In case rebooting the speaker didn't work, let's try resetting your speaker by pressing the Reset Button for 5 seconds (Front LED will light up).
   \n\t
2. Go ahead with the setup again (remember to open Google Home app )
3. Reboot your mobile device

\n\n

WiFi Network Troubleshooting

\n\n

• Check your WiFi router settings. Be sure that UPnP (Universal Plug and Play) is enabled.
• Change Wireless channels on your WiFi router on 2.4G or 5G..\n\t
  • Avoid using other channels on 2.4G other than 1, 6 and 11. The rest are a NO-GO.
  • Keep a maximum of 8 devices in total on 2.4G (that is including our speakers).
  • Move products to WiFi 5G band, if they support it, to reduce the stress factor on the 2.4G band
  \n\t
• Check your WiFi router to see if there is a MAC address limitation.\n\t
  • MAC address limitation is when your router is set/fixed to a maximum of 20 devices (or whatever it may have been configured for).
  • When you want to add the 21st device your router will deny access because you have filled up the 20 devices.
  • You need to clear or delete old devices that are not in use anymore. This may require someone with technical knowledge.
  • We advise that you don't have any MAC address limitations at all.
  \n\t
• Avoid bad extenders (Cheap ones are often not powerful enough to deal with or handle the kind of data required to transmit high quality audio).\n\t
  • With extenders, the connection between "router and extender" is decreased by 50%.  That said, your data will be even slower,. having to processes it while the speed is decreased.
  \n\t

\nThere are more things you can do to optimize your WiFi router, but these above are the most common issues happening in users homes.

 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmZoAAK"},"Title":"JBL & HK WiFi speakers: Device needs to be activated before setup","Id":"ka25d000000XmZoAAK","ArticleNumber":"000018255","Question__c":"When trying to set up my speaker with the Google Home app, I get a message that says “Device needs to be activated before setup”. How do I proceed?","Process__c":"If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
 ","Answer__c":"If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmZmAAK"},"Title":"JBL & HK WiFi Speakers: WiFi network does not appear in list","Id":"ka25d000000XmZmAAK","ArticleNumber":"000018279","Question__c":"When using the Device Utility app to set up my speaker, my Wi-Fi network is not appearing in the list. How can I connect to my Wi-Fi network?","Process__c":"If the network does not appear, you can manually type in the network name (SSID) and password to connect.
 ","Answer__c":"If the network does not appear, you can manually type in the network name (SSID) and password to connect.
 ","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d0000007Kw6AAE"},"Title":"Mesh Network and Soundbar Interference","Id":"ka25d0000007Kw6AAE","ArticleNumber":"000040268","Question__c":"Why is my soundbar having interference issues with my mesh network?","Process__c":"

If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring. 

\n\n

  

\n\n

1. Move the mesh nodes far away from the soundbar 
2. Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this) 
3. Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default. 

\n\n

  

\n\n

What is MU-MIMO? 

\n\n

MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time. 

\n\n

  

\n\n

NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.

","Answer__c":"

If you have a mesh network (more commonly seen in Eero Mesh networks), it is possible that you may experience your satellite speakers or subwoofer intermittently disconnecting from the soundbar. This is similar to normal interference that occurs with products on a similar wireless frequency. The special thing about Eero mesh networks is that they do not allow you to move a device to the 5Ghz or 2.4Ghz band. The system will automatically decide which devices should be on which band and will move them accordingly (switching whenever needed). Some of our soundbars run on a 5Ghz frequency which is where the interference can occur. Since we cannot change the signal in which they operate and we cannot change the band they are connected to via their Eero mesh network, there are a few things you can do to try and stop this from occurring. 

\n\n

  

\n\n

1. Move the mesh nodes far away from the soundbar 
2. Use the 2.4Ghz band instead of the 5Ghz band (if your mesh system allows this) 
3. Ensure to enable/utilize the MU-MIMO setting (not applicable to all mesh systems). Please refer to your router's website to see if MU-MIMO is being utilized by default. 

\n\n

  

\n\n

What is MU-MIMO? 

\n\n

MU-MIMO stands for Multi-User, Multi-Input, Multi-Output. This allows for the router to send a signal to multiple devices at one time vs. the previous version in which the router would be able to connect to multiple devices, but only send the signal to one device at a time. 

\n\n

  

\n\n

NOTE: You may notice that when the soundbar is turned on, there may be a dip in the immediate internet speed, but it will go back to normal within less than a minute.

","ArticleType":"How_Tos__kav"},{"attributes":{"type":"Knowledge__kav","url":"/services/data/v45.0/sobjects/Knowledge__kav/ka25d000000XmbsAAC"},"Title":"HK CITATION: Lost connection to wireless network","Id":"ka25d000000XmbsAAC","ArticleNumber":"000016834","Question__c":"Wireless network connection is lost or not connected anymore","Process__c":"

Wireless Network connection is lost or not connected anymore

\n\n

In case you have lost the Wireless Network connection, recently changed your Wireless name/password, or changed your ISP (service provider), you may need to set up your Citation device again. 

Follow our steps below to try fixing the issue and reconnecting your device again.

\n\n

1. Open your Google Home app .
2. In the top right corner of the home screen, tap Devices  to see your available devices. 
3. Scroll to find the Citation device card. 
4. Tap SET UP and complete the setup steps.
5. All of your previous settings, account information is still attached to the speaker. You only need to add it again to your Wireless Network.

\nNote: The name of your Citation device might be a room name such as "Living Room Speaker", simply tap the SET UP.
 \n\n

Wireless Network connection failed

\nIf the above solution did not work and you still have issues with connecting to your new Wireless Network, then try following these steps:\n\n

1. Reboot your Wireless router. In many cases it can help a lot with a little reboot!
2. Reset your Citation device.\n\t
   1. Press and hold down the RESET BUTTON for 15 seconds, the front LED will light up indicating it has been reset.
   2. Your Citation device will now boot-up again. It can take roughly 45 seconds until it is ready.
   \n\t
3. Try to set it up again via your Google Home app

","Answer__c":"

Wireless Network connection is lost or not connected anymore

\n\n

In case you have lost the Wireless Network connection, recently changed your Wireless name/password, or changed your ISP (service provider), you may need to set up your Citation device again. 

Follow our steps below to try fixing the issue and reconnecting your device again.

\n\n

1. Open your Google Home app .
2. In the top right corner of the home screen, tap Devices  to see your available devices. 
3. Scroll to find the Citation device card. 
4. Tap SET UP and complete the setup steps.
5. All of your previous settings, account information is still attached to the speaker. You only need to add it again to your Wireless Network.

\nNote: The name of your Citation device might be a room name such as "Living Room Speaker", simply tap the SET UP.
 \n\n

Wireless Network connection failed

\nIf the above solution did not work and you still have issues with connecting to your new Wireless Network, then try following these steps:\n\n

1. Reboot your Wireless router. In many cases it can help a lot with a little reboot!
2. Reset your Citation device.\n\t
   1. Press and hold down the RESET BUTTON for 15 seconds, the front LED will light up indicating it has been reset.
   2. Your Citation device will now boot-up again. It can take roughly 45 seconds until it is ready.
   \n\t
3. Try to set it up again via your Google Home app

","ArticleType":"How_Tos__kav"}]}